Two Stages PM Compressor 300hp
The two-stage permanent magnet variable frequency air compressor is
a compression process, entering the first stage of compression, and
then entering the second stage of compression. At the same power,
the gas output of the first stage of compression is up to 15%, and
the energy saving effect can reach 20-50%.
Model | Power(KW) | Pressure(MPa) | Capacity(m3/min) | Pipe Diameter | Weight (kg) | Dimension(mm) |
HVV30 | 22 | 0.7-1.3 | 4.3-2.7 | G1-1/2 | 650 | 1500*1000*1350 |
HVV40 | 30 | 0.7-1.3 | 6.0-3.9 | G1-1/2 | 700 | 1500*1000*1350 |
HVV50 | 37 | 0.7-1.3 | 7.1-5.4 | G1-1/2 | 750 | 1500*1000*1350 |
HVV60 | 45 | 0.7-1.3 | 10.0-6.8 | G2 | 1250 | 2100*1300*1650 |
HVV75 | 55 | 0.7-1.3 | 13.0-7.5 | G2 | 1300 | 2100*1300*1650 |
HVV100 | 75 | 0.7-1.3 | 15.5-10.2 | G2 | 1350 | 2100*1300*1650 |
HVV125 | 90 | 0.7-1.3 | 19.8-14.0 | DN80 | 2700 | 2500*1650*1900 |
HVV150 | 110 | 0.7-1.3 | 24.0-16.0 | DN80 | 2800 | 2500*1650*1900 |
HVV180 | 132 | 0.7-1.3 | 27.5-19.0 | DN80 | 3000 | 2500*1650*1900 |
HVV220 | 160 | 0.7-1.3 | 33.0-22.5 | DN80 | 4300 | 3000*1900*1950 |
HVV250 | 185 | 0.7-1.3 | 39.0-27.5 | DN80 | 4400 | 3000*1900*1950 |
HVV270 | 200 | 0.7-1.3 | 43.5-31.5 | DN100 | 5000 | 3600*2200*2200 |
HVV300 | 220 | 0.7-1.3 | 51.5-35.5 | DN100 | 5500 | 3600*2200*2200 |
HVV340 | 250 | 0.7-1.3 | 54.0-38.0 | DN125 | 6000 | 3600*2200*2200 |
HVV380 | 280 | 0.7-1.3 | 60.0-43.0 | DN125 | 6800 | 4000*2300*2300 |
HVV420 | 315 | 0.7-1.3 | 65.0-50.5 | DN125 | 7000 | 4000*2300*2300 |
HVV480 | 355 | 0.7-1.3 | 75.0-55.0 | DN150 | 8500 | 4200*2200*2350 |
HVV540 | 400 | 0.7-1.3 | 84.0-61.0 | DN150 | 9000 | 4200*2200*2350 |
Features
1. The compression ratio of each compression stage is precisely
designed to reduce the load on bearings and gears and extend the
service life of the main Airend.
2. The main Airend is designed with large rotor and low speed, and
contains two independent compression units.
3. The first stage compression rotor and the second stage
compression rotor are combined in a shell, respectively driven
directly by helical gear, so that each stage rotor can obtain
better linear speed and higher compression transmission efficiency.
4. The rotor adopts the newly designed rotor ultraviolet current
profile. After more than 20 finishing processes, ensure the rotor
profile precision, reliability and effectiveness.
Advantages:
1. High quality control(ISO14001/CE/SGS Energy saving certificate)
2. Fast Delivery( 20-30 days for large orders)
3. Good service for pre-sale,after-sale( strong technical support
and professional after-sales team)
4. Trial small order acceptable( Ordering quantity according to
your actual needs)
